The technology that drives your industry.
Repair and maintenance of PLCs, servo drives, VFDs, HMIs and industrial PCs of every brand. When the manufacturer no longer supports it, TECSI does. You need it, we solve it.
What can TECSI help with? Pick where to start
Quote in 12h · 24/7 emergency response · Free loaner
Industries that trust TECSI
- Astra
- Bombril
- CGR International
- Corpo de Bombeiros
- Elgin
- JBS
- Kobber
- Marinha do Brasil
- Michelin
- Piracanjuba
- Pirelli
- Rassini-NHK
- Saint Gobain
- Seara
- Sinter Futura
- Sococo
- TheraSkin
- Tramontina
- Três Corações
- Volkswagen
- 12h
- for the quote, after the equipment arrives
- 42+
- brands serviced, discontinued lines included
- 14
- industrial sectors served
- 24/7
- emergency service for a stopped line
About us
Who repairs your equipment
Our own laboratory in São Bernardo do Campo and on-site service. The same team that diagnoses at the bench is the one that walks your plant floor, from PLCs to servomotors, every brand, including the ones the manufacturer no longer supports.
Always doing our best and constantly developing the skill and competence to deliver a solution.Get to know TECSI
Case studies
Real problems, solved
Every case below happened on a stopped production line. The names, the equipment and the solutions are real.
What people whose line has stopped say
Testimonial translated from Portuguese.
Problem
Main line down because of a failing electronic unit, with a very long lead time for a replacement.
Our main line was down because of an electronic unit that was failing, and we had no time to wait for a new one, since the lead time was very long. TECSI stepped up straight away, lent us a unit and came out overnight from Saturday to Sunday, solving our problem at the Rio de Janeiro plant; today they are looking after me in Santa Luzia, MG. I highly recommend TECSI's service and partnership.
Bruno Freitas
Maintenance Coordinator · Grupo 3corações
Problem
Rolling line down for 2 days with no way to pin down the cause of the fault.
Our rolling line had been down for 2 days and we could not pin down the cause of the fault. We got in touch with Diogo at TECSI, and he pointed us straight to a possible encoder fault; we sent in two damaged encoders we had in-house for repair at TECSI, and out of the two he managed to make one, which went back on the machine and ran immediately with no faults. Thank you, TECSI. Well done!
Ricardo Duarte
Maintenance Supervisor · Rassini-NHK RJ
Problem
A water leak on the injection moulding machine damaged the HMI's screen and touch panel.
There was a water leak on an injection moulding machine at our company; the water reached an HMI that controls the machine's parameters and damaged its screen and touch panel. We removed the unit and sent it straight to TECSI, who gave us the best possible service, picked the unit up promptly and had people available to analyse it and carry out the repairs.
Matheus Costa
Maintenance Planning and Control · Bombril
Problem
Machine running an old system, with faults on the HMI.
Our machine had an old system and problems with the HMI; a new system was developed, matched to the machine, and the HMI was replaced. The work came out excellent and went beyond what we had been led to expect.
Ricardo Neves
Maintenance Coordinator · Saint Gobain
Problem
Electronic board unavailable on the market, and the one on the machine running erratically.
We had a machine at risk because an electronic board was unavailable on the market, and the one running on the machine was working erratically. TECSI offered to help us and with their help we solved the problem quickly.
Leandro Vicente
Maintenance Supervisor · Michelin
Problem
Production line down, waiting on a piece of equipment.
We had a small problem on a production line that unfortunately had to stop; we contacted the people at TECSI to see whether they had what we needed at that moment, and they replied right away and said they could help. This wonderful team looked after us promptly and in the best possible way, we bought the unit from them in perfect working order, and we are already back in full production.
Carlos Eduardo
Electrical Department Supervisor · Sococo
Problem
Technical fault on the light tower of a Spartan fire truck.
First of all, our immense thanks for the almost instant response in solving a technical problem on a light tower belonging to a Spartan fire truck. TECSI alone managed to identify and solve the problem in just 1 day! On behalf of the Military Police, the Fire Brigade and the 2nd Battalion, our sincere thanks for the excellent immediate support and for the services provided!
Leandro Jacobsen
Fire Brigade Corporal, Military Police · Corpo de Bombeiros
Why TECSI
Production downtime costs by the minute. We work on that scale.
The commitments below apply to any equipment, of any brand, in any of the 14 industries we serve.
12h
Quote in 12 hours
Diagnosis and commercial proposal delivered within 12 hours of receiving the equipment.
24/7
Emergency response
Team mobilized outside business hours, on weekends and holidays, for stopped lines.
Free
Loaner equipment
While we repair yours, we lend an equivalent unit so production does not stop. At no cost.
Free
Free assessment
Full technical evaluation of the equipment with no obligation to approve the repair.
Included
Free technical support
Post-repair follow-up and ongoing technical guidance at no additional charge.
Multi
Multi-brand parts
Spare parts stock: IGBTs, encoders and resolvers, including for discontinued lines.
How it works
From stopped machine to equipment back on the line
One path, from first contact to warranty, with no hidden steps and nothing done before you approve the quote.
- 01
Diagnosis
You send or bring in the equipment and our engineering team evaluates it in our own lab.
- 02
Quote
You get the fault we found and a detailed proposal. Nothing is done before you approve it.
- 03
Repair
Multi-brand bench repair, discontinued lines included, with spare parts in stock.
- 04
Testing and warranty
The equipment comes back tested, with a warranty and post-repair technical support.
Two pieces, one solution.
While your equipment is on the bench, we lend you an equivalent one so the line keeps running.
Start with the diagnosisRepair vs replace
Before buying new equipment, do the math
For most breakdowns, repair gets the machine back faster and for a fraction of the cost, and it is the only way out once the line is out of production.
Repair with TECSI
Buy new
Repair with TECSI
A fraction of new equipment
Buy new
Full investment
Repair with TECSI
Quote in 12h, back in days
Buy new
Weeks to months of importing
Repair with TECSI
Serviced, even out of production
Buy new
No replacement on the market
Repair with TECSI
Loaner equipment at no cost
Buy new
Line down until delivery
Repair with TECSI
Warranty and post-repair support
Buy new
Depends on the supplier
Repair with TECSI
Circular economy, no disposal
Buy new
Becomes electronic waste
Do you have equipment down right now?
Describe the model and the fault you observed. TECSI's engineering team replies with the diagnosis and the repair path.
Repair by equipment
Which equipment stopped?
Our own laboratory in São Bernardo do Campo and on-site service. Full diagnosis and a quote within 12 hours.
Repair by brand
The manufacturer dropped support? We didn't.
We service discontinued and out-of-production equipment, migrating to successor platforms when direct repair is not viable.
- ABB
- Allen Bradley
- Baldor
- Balluff
- Baumüller
- Beckhoff
- Bosch Rexroth
- B&R Automation
- Delta
- Emerson
- Endress+Hauser
- Fagor
- Festo
- Fuji Faldic
- Gefran
- Indramat
- Invertek
- KEB
- Kollmorgen
- Koyo
- Kuka
- Lenze
- Leuze Electronic
- Mitsubishi
- Nachi
- Omron
- Panasonic
- Parker
- Phoenix Contact
- Pilz
- Rockwell Automation
- Sanyo Denki
- Schneider Electric
- SEW-Eurodrive
- SICK
- Siemens
- SMC
- Star Seiki
- Telemecanique
- Wago
- WEG
- Yaskawa
- ABB
- Allen Bradley
- Baldor
- Balluff
- Baumüller
- Beckhoff
- Bosch Rexroth
- B&R Automation
- Delta
- Emerson
- Endress+Hauser
- Fagor
- Festo
- Fuji Faldic
- Gefran
- Indramat
- Invertek
- KEB
- Kollmorgen
- Koyo
- Kuka
- Lenze
- Leuze Electronic
- Mitsubishi
- Nachi
- Omron
- Panasonic
- Parker
- Phoenix Contact
- Pilz
- Rockwell Automation
- Sanyo Denki
- Schneider Electric
- SEW-Eurodrive
- SICK
- Siemens
- SMC
- Star Seiki
- Telemecanique
- Wago
- WEG
- Yaskawa
Didn't find your brand? Send us the equipment model and we service every industrial automation brand.
Services
Far beyond one-off repair
From preventive maintenance to a complete automation project, with in-house engineering in PLC and HMI programming and SCADA systems.
Industries
14 industrial sectors served
Every industry has its own standards, risks and critical equipment. We know yours.
Compliance
Certifications and standards
Our team enters your plant in compliance with occupational safety regulations. We keep expanding our certifications — below, what we already hold and what is in progress.
CETESB
ActiveEnvironmental licensing for the state of São Paulo
CREA
ActiveRegistration with the engineering and agronomy council
CO₂
ActiveCarbon emissions certification
Certifications in progress
Management system being implemented
ISO 9001· quality
ISO 14001· environment
ISO 45001· occupational safety
Sustainability
Repair is circular economy
Every unit we recover is a unit that does not become electronic waste.
We act responsibly so that old or damaged components are collected and recycled in an environmentally sound way, following ESG standards. Repairing equipment is, by definition, circular economy.
See the full commitmentTechnical blog
Straight from the bench
Short articles from TECSI's engineering team: failure symptoms, maintenance decisions and what to do before the line stops.
Frequently asked questions
How long does the quote take?
Within 12 business hours of the equipment arriving, with the diagnosis and a detailed commercial proposal before any work is done.
Do you repair discontinued equipment?
Yes. The repair is multi-brand and covers discontinued lines, with spare parts in stock such as IGBTs, encoders and resolvers, including for what is already out of production. When a direct repair isn't viable, we migrate to the successor platform.
Is the assessment free? Does the repair have a warranty?
The technical assessment is free and with no obligation to go ahead with the repair. Once repaired, the equipment comes back with a warranty and post-repair technical support.
How do I send in my equipment?
We take in equipment for bench repair at our lab in São Bernardo do Campo, SP, and we also provide on-site service. Start with a quote and the team will guide you through shipping.
Do you handle emergencies with the line down?
Yes. Emergency service is 24/7, with a team mobilized outside business hours, on weekends and holidays. During the repair there's loaner equipment at no cost, so the line doesn't stay down.
Which brands do you service?
Multi-brand repair for Siemens, Allen Bradley, Yaskawa, WEG, Mitsubishi, SEW, Bosch Rexroth and dozens more, discontinued lines included.
Send us the equipment. We give production back.
Free assessment and a quote within 12 hours. If the line is down right now, talk straight to the technical team on WhatsApp.
You need it, we solve it.